1998 Triumph Sprint Project.

[Catteeclan]

15 hours ago, KAYZ1 said:

Job i am doing now is my Honda C70 bags of power, so much so that the clutch slipped...done that now fitting the correct front forks to it.

I am the second owner..bought new by my Dad in 1977..3thou odd miles. Mum rang me 12 years ago to say they had found it in the garage under

a sheet..you better come and take it before your brother sells it. I was at Mums before she put the phone down. 

I see you've got it fired up.
https://www.facebook.com/share/r/1CgXHdwYpF/

[Saul]

Next step, new EBC HD clutch springs to fit, also cover to be painted.  
Check with the Triumph T300 group and you don’t have to drain the oil to take the cover off.   They were right

[KAYZ1]

Next job for a young lad is the RM80, had a qwik look see...oil pump dead so big end and crank are in need of replacment, as is the piston and bore.

So he is going for a big bore kit..so i have to make acrank case jig to split the cases first..I will get some metal in to do that next week. I have a drybolic 

puller/pusher  so that may help..