Jump to content

A Self-Balancing Harley-Davidson?


Hugh Janus

Recommended Posts

Will there be a gyroscope option on future Harleys? A new patent shows balance aids may be on the way.
Will there be a gyroscope option on future Harleys? A new patent shows balance aids may be on the way. (Harley-Davidson /)

Harley-Davidson’s problems have had plenty of publicity in recent months but they largely boil down to two factors: an ageing fan base and difficulty attracting new buyers—very much the same for all of motorcycling.

Some criticism of Harley has been ill-deserved—after all, despite the company’s staid reputation it’s a leading light in some areas of technology, including electric bikes—but it’s also clear that the type of heavyweight cruisers and tourers making up a big slice of the firm’s profit margins have problems appealing to novices, and aren’t easy practice for the oldest of motorcyclists. Their sheer size and weight, which is part of their attraction for some, mean they can be hard to handle, particularly at low, maneuvering speeds.

But what if Harley created a form of rider-assistance system that eliminated the possibility of an embarrassing low-speed tip-over? That’s precisely what this new patent is intended to address.

Harley’s idea for an added gyroscope inside the Tour-Pak is designed to help keep the bike upright at slow speeds.
Harley’s idea for an added gyroscope inside the Tour-Pak is designed to help keep the bike upright at slow speeds. (Harley-Davidson /)

The firm’s idea, as revealed in this new patent application, is to add a gyroscope to help maintain balance when stationary and at walking speeds. Bolted into a standard-looking Tour-Pak top case, this isn’t the sort of microelectromechanical gyro that forms the basis of modern inertial measurement units in many new sportbikes. Instead it’s a traditional, spinning-mass gyro—the sort that was used for guidance on the Apollo moon missions and effectively a scaled-up version of the seemingly gravity-defying children’s toy gyroscopes.

RELATED: Honda Shows Self-Balancing But Non-Gyro Bike

The gyroscope itself is made up of a heavy flywheel, spun to between 10,000 and 20,000 rpm by an electric motor mounted in a gimbal that, during normal riding, allows it to freely move in both the roll and pitch axis. That means, apart from some additional weight, it doesn’t influence the bike’s behavior.

The traditional spinning-mass gyroscope would be informed by speed and tip sensors to compensate for lean.
The traditional spinning-mass gyroscope would be informed by speed and tip sensors to compensate for lean. (Harley-Davidson /)

At low speeds (below around 3 mph) the gyroscope comes into action as a balance aid. A clutch engages, locking the gimbal’s roll axis to a lever connected to a computer-controlled linear actuator. That gives the computer the ability to tilt the spinning mass from side to side, creating a force that influences the entire bike. Tip sensors, also mounted in the top case, register when the bike starts to lean to one side and the computer and actuator work to compensate for that lean.

Sign up here to receive our newsletters. Get the latest in motorcycle reviews, tests, and industry news, subscribe here for our YouTube channel.

It takes relatively little force to do this, provided it’s applied before the bike has started to lean too far, so the small movements applied to the gyroscope are enough to allow the bike to self-balance. For a novice rider who wants a Harley cruiser but doesn’t have years of experience to draw on, that’s a potentially huge benefit. It’s also a potentially big attraction for older riders, or simply smaller ones who are worried they’re lacking the leg strength to hold up a big Harley that’s started to topple over. As soon as the bike reaches speeds over 3 mph, the gyro’s actuator is disengaged, allowing it to lean and balance normally.

The gyroscope exploded view shows a flywheel and electric motor mounted in a gimbal.
The gyroscope exploded view shows a flywheel and electric motor mounted in a gimbal. (Harley-Davidson /)

Perhaps the slickest element of Harley’s patent design is the fact it’s self-contained. Rather than being built into a bike, the whole gyroscope unit and the computer controlling it is mounted in the Tour-Pak top case. That means it only needs an electrical feed to operate and could be retro-fitted to virtually any number of the firm’s bikes. The patent suggests that a second wire could take speed readings from the ABS or that a built-in GPS system could be used to measure speed instead.

The system comes into play at speeds below 3 mph via a linear actuator, to help balance the bike as it detects lean.
The system comes into play at speeds below 3 mph via a linear actuator, to help balance the bike as it detects lean. (Harley-Davidson /)

For new riders it means the gyro could be removed once they’ve gained the confidence to ride without it, and for ageing motorcyclists the design means they could retrofit their existing bikes to add the balancing system so they’re not forced off two wheels purely due to weakening legs.

The patent design shows a unit that’s self-contained in a Tour-Pak—but it could be potentially retrofitted to almost any of H-D’s models.
The patent design shows a unit that’s self-contained in a Tour-Pak—but it could be potentially retrofitted to almost any of H-D’s models. (Harley-Davidson /)

While a patent application is far from a guarantee that an idea will make production, if this design is proven to work the way Harley hopes, then it could be a revolutionary addition to the company’s offerings.

Source

Link to comment
Share on other sites

This is great stuff, if it makes a bike balance while going slow it will eventually be able to help it handle better when going fast. 

Link to comment
Share on other sites

27 minutes ago, Pedro said:

 it will eventually be able to help it handle better when going fast. 

Are they going to put it on something that isnt a Harley? :classic_unsure:

Link to comment
Share on other sites

Harley does the bikes they do because they want to, not because they can't do faster lighter bikes. They are a major player.

BMW has got the self riding bike that goes around tracks by itself, and Honda has the same thing. But Harley somehow is the first to have something to be put in real use in a way that is probably more appreciated by their customers, which is quite smart.

To boot it, Harley has come up with a simpler way to adapt it to any one of their bikes without major electronics to steering and stuff like that, way clever.

 

Of course, if it does fall down nobody will be able to pick the top heavy beast ...

Link to comment
Share on other sites

9 minutes ago, Buckster said:

We all know why you are asking.

We all know why you arnt, no pics, blah blah blah, mr teckie doesnt own  a digi camera in 2020, after riding the world 7 times over on a honda 125...lol

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

Privacy Policy