All Activity

The new dust covers want to ride up the stanchions rather than clip into the fork legs. Any tips.

I was at my bank yesterday waiting in line. There was just one lady in front of me, an Asian lady, who was trying to exchange yen for pounds. It was obvious she was a little irritated. She asked the teller, "Why it change? Yesterday, I get two hunat poun of yen. Today I only get hunat eighty? Why it change?" The teller shrugged his shoulders and said, "Fluctuations." The Asian lady says, "Fluc you white people too!"

All done, first time I have ever done fork seals. Fiddly mucky job but straightforward enough. Had to go and get my mate to undo the dampener bolts on the bottom of the forks. I will buy the long Allen sockets I need for the next time.

We are on our second week of rain.

The quality on KOYO seems to be slipping.

Been sat here since 8 and done bugga all. Getting bored now although it's still raining. Shopping's looking a good idea ATM. MotoGP this weekend not not all is lost. And where's Clive n Fred?

Bonus, spare for next time. SKF have always had a good name but Koyo have always been good bearings too.

I just realised they sent five wheel bearings instead of four.

Yeah I do know that and it's why I am fretting, but a valve check in a garage is nearly as expensive as a second hand motor, not moaning I understand why. Although that would be a shame to wreak the motor given the one in the bike seems pretty healthy. I think what I will have to do is learn how to do it myself, at least it would put my mind at rest. I have watched a few videos of how to's and it's pretty complicated, to me, but I'm sure I could learn if I have to. I have done loads of valve clearances with tappets over the years. Just have take it slow and methodically doing it one step at a time. Stills fills me with apprehension but needs must I suppose.

Try Londonistan

If you don't rag it around then the gaps should be ok. The danger is they tighten and can then burn of the edges of the valves and seats.

Just got the renewal notice from Bennetts for my CBF600, fecking £198 TPFT with a £500 compulsory excess for a bike worth about £1000. Shopped around and got the same cover and excess from One Click, Allianz Underwritten, for £97.17. Bit more palatable. No add ons as I have got cover for that elsewhere.

Not so tired this morning and a bit more confident to have a crack of stripping the forks down and doing the seals myself after a couple of helpful videos on Youtube. Still know a man that can if things go tits up.

The plugs that came out did not show any sign of wear. I will clean them up set the gaps and keep them.

Got the new swingarm bearings today, also got a full compliment of SKF wheel bearings for the new wheels, I have to say they seem better quality than the KOYO.

Here’s to border force not letting you back in to the country.

I just keep cleaning and gapping plugs until they show signs of physical breakdown.

I like the sound of that. I was thinking about doing them every other year but I did 5k last year so that would make it roughly every three years for plugs. I'm gonna change all the fluids this year so as to set a datem as a starting point. When I bought the bike the previous owner said he had a full service done the year before for the MoT and that would match with what I found today after 5000 miles in my ownership and him only doing 100 miles between MoT's. The only thing that troubles me a little is that I have no record of valve clearances being done and the bike is at 36000 miles. Doesn't necessarily mean they haven't been done just I have no record of it. They are supposed to be done every 16000 I believe. I chatted to the mechanic I use about it and he said not to sweat it. As long as the bike starts fine you shouldn't worry. It starts perfectly and the motor is pretty quiet compared to other Honda 600's I have heard this year. But I do worry as that is my way

Mandis last 1000 was 4500 intervals with the plugs changed every other time if I remember right. I've changed them on the newer one she now has only to find once the job was done I took out Iridium tipped. I'll put them back in next time, always read the service book first. Scrap that, 4000mile intervals and plugs changed at 16000 miles.

Sad CBF600

Just finished stripping the forks out of the bike. Total pain in the arse and filthy, seals been misting for some time I would say judging by the gunk. I don't have an impact and looking at the dampener bolts in the bottom of the fork legs I will just mangle them with allen keys. Be cheaper in the long run to pay the local bike shop to do it with the right tools. After all I have done all the donkey work. Also I am pretty sure it will be cheaper to pay them than buy an impact.